Givens Engineering Inc can custom manufacture below the hook lift assists for virtually any shape and capacity. All lift assists are designed and manufactured in accordance with ASME B30.20.
We also design complex, active lifting devices including pneumatic grippers, magnetic lifters & vacuum lifters for hoists, robots or manipulators. Our 'active' end effectors can incorporate a number of complex movements or accommodate many different part models. Please see the End Effector / Lift Assist Tooling section for more information.
The following examples are just a handful of lift assists that we have supplied to our satisfied customers:
Latching Frame Lifter
Truck frame lifter with passive mechanical latch. The latches are kept locked by the weight of the load. There are 2 latches that are operated by a single handle.
Capacity is 6000 lbs.
Cylinder Scissor Tong
Scissor tongs for Ø18" cylinders. A mechanical safety latch has been added.
Adjustable Scissor Tong
For waterpump assemblies.
These tongs feature adjustable jaws to accommodate a large variation in part size.
For capacities up to 100,000 lb.
The example shown has a capacity of 20,000 lbs and accommodates a maximum coil diameter of Ø50". This coil hook also features an oversized counterweight.
Load Levelling Spreader Beam
The lifting shackle is driven along the beam by an electric motor though a worm gear and reducer. The position of the shackle is moved to change the angle of the part being lifted. Hung from this device are 2 latching frame lifters (shown top left).
Accommodates 2 different models of automatic transmissions.
The capacity is 240 lbs. The part is lifted from a lug on the housing and from underneath a ledge on the casting. A manual, locking latch retains the part.
Large Scissor Tong
For large castings.
Mechanical tongs can be made in any size as long as the operator can open them. Beyond that size, a powered means of opening the jaws, such as air, is necessary, or latching tongs, described below, can be used.
Mechanical Latching Tool
For heavy truck frames.
These tongs open and close semi-automatically; each time the tongs are raised and lowered, the jaws change state. The operator, with a remote handle, trips the latch from open state to closed state, and vise versa.
For unusual shapes (truck spindle shown).
Grabs are custom-designed to fit whatever load is being lifted, with latches to hold the part firmly.
For capacities up to 100,000 lb (Example shown is 6000 lb).
Coil hooks are balanced with a counterweight, loaded and unloaded.
Tongs are a low-cost means of gripping an object using the weight of the load to keep the jaws closed. They require that the operator manually open and close the jaws
Every lifting device must meet these stringent requirements:
At least a 4:1 designed safety factor
Meeting or exceeding ANSI specifications
All welders are individually CWB certified
Critical welds and other stress points are dye-penetrant tested, with documentation
Load testing to double the rated capacity, with documentation
Assembly drawing stamped by a Professional Engineer
Rated load conspicuously labeled
Complete mechanical, pneumatic and electrical documentation is included with every unit shipped.